Design and Build Your Own Furniture for Awkward Spaces

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Do you have an awkward space in your home where standard furniture just won’t fit? We did. Our solution was to design and build our own furniture to fit the space. Read on to see how we made a folding loveseat to fit an awkward space in our living room, and a loft bed to fit a short wall in our daughter’s bedroom.

Bulky Furniture Troubles

When my kids were small, I had a big overstuffed couch and loveseat in my living room. The soft furniture felt safe for my little ones who, against my warnings, liked to use them as a trampoline and jungle gym. When they got older, I wanted something different. The overstuffed loveseat took up a lot of space in the living room. We wanted more floor space to exercise. But the only wall available was too short for the loveseat. I searched long and hard for something that would fit our awkward space, but found nothing. We decided that we would have to build what we wanted. Since we had to build it, we decided to make it fit all our needs and designed it to fold up against the wall to maximize floor space.

Easy to Clean

Another thing I did not like about my overstuffed furniture was that it was hard to clean. I had to flip the couch over or slide it out of the way in order to vacuum underneath. The fabric could only be spot cleaned. To remedy this, we decided to go with a wooden futon frame design. The futon frame is easy to clean under and the futon cover is removable and machine washable. I made sure to get zippered pillow covers that could be removed and washed as well.

Making a Cushion Cover

One of the tricky things about making this loveseat was the bottom cushion. Eventually, I found a bench cushion online that was the right dimensions. It did not come with a cover, so I made a zippered cover that would be easy to remove and clean. I had never made a cushion cover before, nor had I ever sewed in a zipper. I think it turned out rather well. Over time, I have decided that the loveseat needs extra cushioning on the bottom. I have a piece of 2" foam that I plan to make a cover for, and place under the existing cushion.

I made this zippered cover to fit my cushion.

Adding a Matching Couch

We needed a matching couch for our homemade loveseat, so I found a used futon frame for $40 and refinished it to match. The coffee table was a $15 thrift store find. It was painted black for over a decade. I gave it a new coat of grey chalk paint, sponge painted the top with a lighter shade, then finished with polyurethane. I brightened up the space with a new area rug.

Short Loft Bed

My daughter's bedroom presented us with another awkward space. We needed to put her bed along the wall, but the wall was too short for a standard length twin bed frame. When I was not able to find anything that would work in the space, I decided to build my own. Since we are not tall people, it was no problem shortening the bed length by a few inches. We wanted to maximize her floor space, so we decided to make it a loft bed. Short ceilings and a ceiling fan meant that the bed could not be too high either.

Making My Bed

I looked at images online to get design ideas, then I adjusted the plan to meet my needs. I measured everything, figured out my dimensions, and made a list of lumber I would need. I shopped for good quality boards, then cut, sanded, stained and finished them with a few coats of polyurethane. I was able to partially assemble the bed in the garage, but the rest had to be assembled in the bedroom. We added a futon mattress and set up a book nook under the loft. The bed is sturdy enough for an adult and I have slept up there when we have had company.

I made my daughter's loft bed from scratch.

Tips for Making Your Own Furniture

1. Look at images to gather ideas and settle on a design, adjusting it to meet your needs.

2. Measure your space and figure out the dimensions for your furniture.

3. Make a list of the lumber you will need and go shopping. Be careful to choose quality lumber that is not cracked, twisted, knotty, or pitchy.

4. Cut your lumber to the right length, and sand off all rough edges.

5. Stain or paint your lumber and finish with a protective coating.

6. Assemble your furniture.

7. Add cushions or other accents if necessary.

8. Enjoy and take pride in your work.

Put your creativity to work! In the end you will have a unique conversation piece that makes the best use of the space you have.

© 2019 Amanda Buck

Lynne Samuel from Malaysia on November 04, 2019:

We have lots of miss-matched furniture for our awkward dad loves carpentry and he makes ours. Excellent read.

Watch the video: Design Ideas Project Woodworking Furniture Space Saving - Build A Smart Bed Combination With A Sofa


  1. Golrajas

    Shiny text. One immediately feels that the author has done a lot of work.

  2. Merlow

    I apologise, but, in my opinion, you are mistaken. I can prove it.

  3. Khaldun

    Bravo, you visited another idea

  4. Durg

    Where here against talent

  5. Bagore

    As the expert, I can assist. Together we can come to a right answer.

Write a message

Previous Article

How to keep birds and beetles off fruit trees

Next Article

The Complete Guide to Garden Hose Fittings